Serato · FirstFader DJ software

Serato Headphones Not Working? Fix Cue Audio Step by Step

A step-by-step Serato audio-routing checklist for silent headphones, wrong outputs or missing cue.

Quick answer: If Serato master audio works but headphone cue is silent, test deck CUE, headphone level, cue/master balance and the selected controller audio device before reinstalling software. Next step →
Illustration of a DJ controller with a laptop showing a generic waveform interface
FirstFader editorial illustration, not a screenshot or endorsement from the software manufacturer.

Published 29 September 2026 · FirstFader guide · How we prepare our guides

Software features, subscriptions, music streaming and device support can change. Confirm the exact controller, operating system and software version on the official support pages linked below before buying or playing a live set.

Separate the two audio paths

Master audio goes to the crowd or studio monitors. Headphone cue should let you hear an upcoming song privately. If speakers work but headphones do not, the software may be fine: first verify that headphones are in the controller’s cue socket, the deck cue is selected and the headphone volume is above zero.

On some controllers the cue/master blend fully clockwise sends only the playing master mix to your headphones; move it to the cue side to preview a different deck. The precise control labels differ by hardware.

Follow a strict fault-isolation sequence

Load a known-working track on both decks. Verify levels, faders and the crossfader. Test the master signal, then turn the headphone level down, connect headphones, press CUE on only one deck and gradually raise the level.

If nothing is audible, inspect Serato’s audio device selection, connect the controller to a different supported USB port, and check the manufacturer’s setup guide for the exact product. Do not switch to Bluetooth headphones as a shortcut for low-latency cueing.

Document the working settings

Once fixed, take a photo of the controller knobs and save a note of the relevant software settings. If the fault returns after an OS update, start by checking published support information rather than reinstalling every program.

Test before the audience arrives. A silent headphone cue at home is frustrating; at a live event it can derail a set.

Official references and source documentation

These are the original manufacturer/software-provider sources used to verify the product-specific points on this page. They are external links and may be updated by their owners.

Related guides

Browse the whole DJ Software library →

Keep moving

Choose your next step