How to Mix Songs With Different BPMs: 5 Practical DJ Methods
Practical choices when two good tracks do not sit at the same tempo.

Decide how big the difference really is
A small tempo change may be handled with normal pitch faders and a little key lock, while a large jump can make the outgoing track sound unnatural if forced into the incoming track's BPM.
Do not assume there is a fixed percentage that is always safe; the effect depends on the song, genre and listener. Compare a gradual adjustment with a deliberately clean cut before reaching for advanced tricks.
Gradual change during a spacious section
If the first track has a long instrumental break, slowly move the tempo by small increments while avoiding obvious vocals.
Keep an ear on the groove: excessively stretching a track can make percussion feel less natural even when key lock maintains approximate pitch.
Once near the incoming track's tempo, start it on a compatible phrase and finish the handover in a conventional way.
Use a breakdown or stop to reset
A break, vocal sting, echo-out or short silence can create a musical pivot between very different tempos. Play the outgoing track's final phrase, make the transition a recognisable event and start the next track firmly on its own first beat.
This can work better than a long blend between incompatible rhythms. Practice the timing in headphones before trying it with an audience.
Half-time and double-time possibilities
Two rhythms can sometimes feel connected even when their displayed BPM values look far apart. For example, a track analysed around 70 BPM may relate naturally to a 140 BPM pulse, depending on rhythmic structure.
That is not the same as saying every 70-to-140 transition will work. Test the phrasing and drum emphasis, not just the arithmetic.
Make the transition serve the set
An intentional tempo jump can refresh the room. Choose tracks because they suit the energy and audience, then choose the technique. If you are repeatedly struggling to blend a pair, it may be better to put a different bridging track between them or allow a clean cut rather than forcing a long overlap.