Gig Ready

Your First DJ Gig Soundcheck: What to Check Before Doors Open

A safe, repeatable order for testing music, microphone and PA outputs.

PA loudspeaker on a stand inside an event venue
Illustration of a PA speaker in an event space. Made for FirstFader; not a photograph of a specific product.

Published 28 September 2026 · FirstFader guide · Editorial policy

Agree the setup with the venue

Ask where you can place the controller, where the power sockets are, who controls the house mixer and what time soundcheck is available. Identify whether the venue supplies powered speakers, a mixer, or a complete managed PA system.

If there is a house sound engineer, follow their instructions rather than changing mixer and processor settings yourself. Keep access routes and fire exits clear.

Wire with levels down

With equipment off or appropriately muted, connect the controller's correct line outputs to the intended input using the appropriate cables. Route cables away from trip areas and protect unavoidable crossings.

Set controller and PA input levels conservatively before bringing the system up in the manufacturer's recommended order. Make sure a sudden unmuted microphone or software notification cannot surprise the room.

Test a known track and cue path

Play a familiar well-produced track at a controlled level. Confirm left and right routing, channel meters, headphone cue and the master output. Raise the level gradually, watching for clipping at every stage.

Walk the accessible audience area to check whether vocals are intelligible and if one side is unusually loud. If there is feedback, turn down the relevant channel before trying to diagnose it.

Check announcements and backups

Speak into the microphone at a realistic distance, test your talkover or mute method, and verify that it does not overload the same signal path as the music.

Play a few seconds from the backup source and ensure you know exactly how to switch to it. Test spare cables if you intend to rely on them. Keep independent copies of essential playlists or exported USB media.

Record the final settings

Photograph your own portable rig settings if permitted and note which cable goes where. Do not photograph confidential venue infrastructure or alter settings without permission.

Keep a written mini-checklist in your case so you can repeat a successful soundcheck under pressure. Soundcheck is also the time to establish sensible volume limits with the organiser.

Related FirstFader guides

Keep moving

Choose your next step