DJ Microphone Feedback: Causes and Practical Fixes
Recognise a feedback loop and make announcements clearly without squeals.

Why feedback happens
Feedback occurs when sound from a loudspeaker reaches an open microphone, is amplified and returns to the speaker repeatedly. The result can be a growing whistle or low-frequency rumble.
It is not usually fixed by turning up the music, and it can become painfully loud very quickly. The first response is to reduce or mute the affected microphone channel, then identify the cause at a safe level.
Work with distance and direction
Keep the microphone away from and, where feasible, behind the front-of-house loudspeakers. Do not point it straight at a nearby cabinet. Hold a handheld microphone near the mouth so you do not have to add large amounts of gain.
Avoid cupping the grille because this can alter the microphone's pickup pattern and encourage feedback. Different microphone designs behave differently; read the product instructions.
Set input gain before EQ
Start with the microphone input gain low and bring it up while speaking at the level you will actually use. Position the master and speaker volumes appropriately. Only then make careful tonal adjustments.
Excessive treble can make feedback easier to trigger; heavy bass is unnecessary for announcements. A high-pass filter, if provided, may reduce handling rumble, but it cannot correct a mic placed directly in front of a loudspeaker.
Use mute discipline
Mute or turn the microphone channel down between announcements. Avoid laying an open mic on a table facing the PA. If using a wireless mic, keep charged spares and check local interference or dropouts during soundcheck.
When guests are invited to speak, brief them on how close to hold the microphone and keep another person available to manage levels.
Practise the announcement flow
Before doors open, rehearse: lower music slightly, unmute, speak clearly, mute, then restore music. This is more dependable than shouting into a distant mic. If the venue has a sound engineer, ask them to set up the microphone safely and agree who has control during the event.