Troubleshooting

DJ Headphones No Cue Sound? Fix It Step by Step

Diagnose a silent headphone channel without affecting the sound your audience hears.

Quick answer: If the master output works but your headphones are silent, check the deck CUE/PFL button, headphone level, cue/master blend and the software headphone-output assignment before changing drivers or reinstalling anything. Next step →
Laptop displaying DJ software beside a controller and USB drive
Illustration of DJ software, a controller and a USB drive. Made for FirstFader; not a photograph of a specific product.

Updated 9 November 2026 · FirstFader guide · How we prepare our guides

First find out whether the master works

Play a track and check whether the master output is audible through your speakers. If the master is silent as well, begin with the general no-sound guide rather than assuming the headphones are broken.

If the speakers work but the headphones do not, focus on the headphone cue bus, output assignment and physical headphone controls. This distinction prevents unnecessary driver and software changes.

Check the obvious headphone controls

Select the cue or PFL button for the deck you want to preview, raise the headphones level carefully and move the cue/master blend away from full master if needed.

Confirm the plug is fully seated in the headphone socket and try known-working wired headphones. Do not turn the headphone volume to maximum to compensate for a missing signal; sudden audio can be damaging when the cue path is restored.

Check the audio routing in software

DJ software must send master and headphone signals to the appropriate channels of the controller's audio interface. A recent device change or operating system audio update can reset those assignments.

Choose the controller's audio device and verify which channel pair is used for cueing. Some controllers require drivers, some do not; use the manufacturer instructions for the exact hardware and operating system.

Test a controlled scenario

Load one known-good track onto deck A, make sure it plays and press its cue button. Set headphone mix to cue, start from a moderate headphone level and listen. If deck A works and B does not, compare their channel cue buttons and fader settings.

If neither works, check routing or the headphones socket. If only one headphone ear works, test a different adapter or cable and inspect the plug type.

Special cases: phones and Bluetooth

A phone or tablet may need a compatible audio interface or device-specific split-output feature to provide separate cue and master signals.

Bluetooth headphones are generally unsuitable for precise live pre-cueing because of latency and connection variability. Check platform-specific instructions instead of assuming the desktop software's audio settings apply to the mobile app.

Official resources and further reading

Check the current instructions for the exact software version, hardware and venue before relying on time-sensitive details.

Related FirstFader guides

Keep moving

Choose your next step